IMPORTANT NOTE

This web page is part of a web site that is no longer actively maintained by anybody at ANU SRES. It has been left on the web due to its apparent popularity (every time we've removed it, people have complained within 24 hours), but is presented AS IS - attempting to contact any individual named on the page is likely to fail, and the SRES webmaster doesn't want to hear about such failures or entertain any communication about updating of the page's contents. You have been warned.

References

ASTM, 1992

ASTM (1992). Annual Book of ASTM Standards. American Society for Testing and Materials. Volume 4.09 Wood.

Boehme, 1992

Boehme, C. (1992). Significance of the density profile for MDF. Holz als Roh und Werkstoff., 50:18-24.

Dube, 1995

Dube, H; Kehr, E. M. (1995). Use of waste paper in MDF manufacture - influence of the proportion of waste paper. Holz-als-Roh-und-Werkstoff., 53:1,20.

Ernst, 1967

Ernst, K. (1967). Moglichkeiten zur verminderung der quelllung bei spanplatten. Holztechnologie, 8:41-47.

Evans, 1994

Evans, P. (1994). Course Notes for FSTY 4151. ANU.

Flinn and Trojan, 1990

Flinn and Trojan (1990). Engineering Materials and their Application. Houghton Mifflin Company, second edition.

Greubel, 1987

Greubel, D ; Drewes, H. M. (1987). Determination of sorption isotherms in wood-based materials at various temperatures using a new measurement method. Holz-als-Roh-und-Werkstoff., 7:289-295.

Hashim et al., 1994

Hashim, Murphy, Dickinson, and Dinwoodie (1994). The mechanical properties of boards treated with vapor boron. Forest-Products-Journal., 44:73-79.

Hsu et al., 1989

Hsu, W. E., Schwald, W., and Shields, J. A. (1989). Chemical and physical changes required for producing dimensional stable wood-based composites. Wood Science Technology., 23:281-289.

Liiri, 1960

Liiri, O. (1960). Investigations into the effects of moisture and wax on the properties of wood particleboard. State Institute for Technical Research. Helsinki, Finland.

McNatt, 1974

McNatt, J. (1974). Effects of equilibrium moisture content changes on hardboard properties. Forest Prod. J., 24(2):29-35.

Minato, 1993

Minato, K. (1993). Moisture adsorption characteristics of medium-density fiberboard and its raw wood fiber treated with formaldehyde. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 39:1162-1168.

Minato and Seto, 1995

Minato, K. and Seto, Y. M. (1995). Formaldehyde treatment of medium-density fiberboard in the low temperature range I. Reaction kinetic aspects. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 41:318-323.

Minato et al., 1993

Minato, K ; Yusuf, S. M., Imamura, Y., and Takahashi, M. (1993). Hygroscopic vibrational and biodeterioration characteristics of medium-density fiberboard treated with formaldehyde. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 39:190-197.

Myers, 1983

Myers, G. C. (1983). Relationship of fiber preparation and characteristics to performance of medium-density hardboards. Forest-Products-Journal., 10:43-51.

Okamoto et al., 1994

Okamoto, H., Sano, S., Kawai, S., Okamoto, T., and Sasaki, H. (1994). Production of dimensionally stable medium density fiberboard by use of high-pressure steam pressing. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 40:380-389.

Orman, 1965

Orman, R. (1965). The response of New Zealand Timbers to fluctuations in atmospheric moisture conditions. Forest Research Institute of NZ, 8.

Park, 1993

Park, J; Seo, S. (1993). Performances improvement of medium density fiberboard by combining with various nonwood materials. Research Reports of the Forestry Research Institute Seoul., 47:35-48.

Pascua-Srianna, 1994

Pascua-Srianna, F. (1994). The Structual role of extractives... PhD thesis, A.N.U. pp143-8.

Pizzi, 1994

Pizzi, A. (1994). Advanced Wood Adhesives Technology. Marcel Dekker, Inc.

Rijsdijk, 1994

Rijsdijk, J F; Laming, P. B. (1994). Physical and Related Properties of 145 Timbers. Kluwer Academic Publishers.

Seborg et al., 1953

Seborg, R. M., Tarkow, H., and Stamm, A. J. (1953). Effect of Heat Upon the dimensional stabilization of wood. Journal of F.P.R.S, 9:59-67.

Spalt, 1977

Spalt, H. (1977). Chemical changes in wood associated with fibreboard manufacture. Wood Technology, 43:193-219.

Stamm, 1964

Stamm, A. J. (1964). Wood and Cellulose Science. The Roland Press Company.

Suematsu, 1980

Suematsu, A ; Hirai, N. (1980). Properties of hot pressed wood. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 26:581-586.

Suzuki, 1988

Suzuki, S; Saito, F. (1988). Fatigue properties of particleboards I. Effects of aging treatment on tensile properties parallel to the surface. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society., 34:590-596.

Suzuki et al., 1987

Suzuki, S., Piao, C. X., and Saito, F. M. (1987). Study on the evaluation of internal bond properties of MDF. Bulletin of the Faculty of Agriculture, Shizuoka University., 37:55-66.

Tiemann, 1906

Tiemann, H. (1906). Effect of moisture upon the strength and stiffness of wood. USDA for Serv Bull.

Voevodin, 1986

Voevodin, V. M. M. (1986). Use of fibreboards for exterior wall cladding. Derevoobrabatyvayushchaya-Promyshlennost, 2:8-10.

Walker, 1993

Walker, J. C. F. (1993). Primary Wood Proccessing Principles and Practice. Chapman and Hall.

Wang, 1991

Wang, T. Y. (1991). A preliminary study on the MDF made from bamboos. Wood Industry Beijing., 5:1, 6-10.

Watkinson, 1990

Watkinson, PJ; van Gosliga, N. (1990). Effect of humidity on physical and mechanical properties of New Zealand wood composites. Forest-Products-Journal., 40:7-8 15-20.

Xu and Suchsland, 1991

Xu, H. and Suchsland, O. M. (1991). The expansion potential: a new evaluator of the expansion behavior of wood composites. Forest-Products-Journal. Michigan State University, 41:39-42.

b

Appendices